Stage x lost position due to external force or an obstacle

Meaning: 

Stage X lost position 

Troubleshooting Steps: 

• Turn off CORSICA and the PLX-Benchtop
• Hold the vertical arm holding the profilometer in place from behind and move the to and from the limit switches on the left and right side to check if there are no obstacles
  (Be very careful not to touch the profilometer tip, as this is very delicate) 
• Turn on the PLX-Benchtop, open Kinesis and 'Home' the stages
• Close Kinesis, open CORSICA and try to run a test

If the issue persists or an obstruction was felt during the moving of the arm, please contact support